K System

Description

Heavy roller conveyors

• Exceptionally solid and stable welded construction consisting of full sections and fitted with thick-walled lathe-manufactured steel rollers.
• The greater the width of the conveyor, the bigger and tougher the overall construction, and the larger the diameter of the rollers as well as the shafts. Roller shafts are stored in adjustable steel sleeves with bearings.
• The individual modules, 1 or 2 m long, are mutually connectable and enable for adjustment of the optimal conveyor length.
• The massive pull-out system allows for adjustable leg height in the range of 760 mm to 960 mm.
• Wide range of accessories and connection components.

KS – Extension to K conveyor

• Module length 2 m.
• The same frame is fitted with fewer rollers.
• The conveyor KS 400 and 520 are equipped with one leg, the conveyor KS 650 and 750 are for the maximum load-carrying capacity equipped with two legs.

Accessories for the K conveyors

KO – Manual measuring device​

• A simple and effective measuring of the required material length.
• This massive system with a robust cast iron housing of the slide stop moves on precise steel guiding and ensures great accuracy of the setting and a long service life.
• You can set the required length manually on an analogue (millimeter) scale.
• The system of movable side stop is retractable in order to prevent gripping of the material and consequent damage to the saw band.
• Can be installed on all types of K conveyors. It is manufactured in two sizes for the roller width 400, 520 mm and for the width 650 and 750 mm.

(includes the slide stop system, feed system and an analogue scale of the appropriate length, not the conveyor itself)

KOD – Digital measuring device

• Ensures precise and simple setting of the required length as well as display of the position on the digital display with the accuracy of 0.1 mm.
• This massive system with a robust cast iron housing of the slide stop moves on precise steel guiding and ensures great accuracy of the setting and a long service life.
• The required length is set manually and arrested. The system is fed by batteries with a long service life.
• Exceptionally stable system of movable slide stop is retractable in order to prevent gripping of the material and consequent damage to the saw band.
• Can be installed on all types of K conveyors. It is manufactured in two sizes for the roller width 400, 520 mm and for the width of 650 and 750 mm.

(includes the slide stop system with a digital measuring device, the feed system and a magnetic tape of the appropriate length, not the conveyor itself)

KO-NC Automated NC Gauging device

• Automated NC Gauging device is designed for measuring profile materials and light solid materials of small diameters.
• The base comprises of massive roller conveyor K 400 or K 520, with attached quality industrial linear axle.
• Servo motor ensures high speed and measuring accuracy of 0,1 mm.
• Backstop trolley moves along linear guiding system.
• User´s friendly device control is done via large HI-RES colour touch screen, located on self-standing control panel.
• Capability of storing frequently used length in memory, ability of backstop to jump aside off the material before cutting.
• Intelligent gauging device with NC control enables the backstop to jump aside and back to set position when the material hits the backstop extensively (when overloaded).
• Gauging device KO-NC could be mounted on the roller conveyors types K 400 and K 520.
• It serves as an ideal device to accompany our semiautomatic bandsaw machines Pilous ARG 300 –