EK series

Description

EKS 18 series
Drill of benchtop manual feed
Feed manual
Transmission belts
Column diameter: 100 mm
Distance from spindle to column: 250 mm
Fixed base, moveable bit
Drilling capacity: ⌀ 18 mm
Tapping capacity: M 14
Spindle cone: CM 3
Engine power: 0.68/1.4 HP
Num. and selections of speeds: (10) 245-4000 rpm
Drilling depth: 120 mm
Weight: 190 kg
Measurements: 1,36 x 0,57 x 0,7 m

EKS 25 series
Drill of benchtop manual feed
Feed manual
Transmission belts
Column diameter: 100 mm
Distance from spindle to column: 250 mm
Fixed base, moveable bit
Drilling capacity: ⌀ 25 mm
Tapping capacity: M 18
Spindle cone: CM 3
Engine power: 0.95/1.8 HP
Num. and selections of speeds: (10) 245-4000 rpm
Drilling depth: 120 mm
Weight: 190 kg
Measurements: 1,36 x 0,57 x 0,8 m

EKS 30 series
Drill of benchtop manual feed
Feed manual
Transmission belts
Column diameter: 100 mm
Distance from spindle to column: 250 mm
Fixed base, moveable bit
Drilling capacity: ⌀ 30 mm
Tapping capacity: M 25
Spindle cone: CM 3
Engine power: 1.2/2 HP
Num. and selections of speeds: (10) 245-4000 rpm
Drilling depth: 120 mm
Weight: 190 kg
Measurements: 1,36 x 0,57 x 0,8 m

EKL 18 series
Drill of round column manual feed
Feed manual
Transmission belts
Column diameter: 100 mm
Distance from spindle to column: 250 mm
Fixed moveable table
Drilling capacity: ⌀ 18 mm
Tapping capacity: M 14
Spindle cone: CM 3
Engine power: 0.68/1.4 HP
Num. and selections of speeds: (10) 245-4000 rpm
Drilling depth: 120 mm
Weight: 250 kg
Measurements: 2,10 x 0,57 x 0,8 m

EKL 25 series
Drill of round column manual feed
Feed manual
Transmission belts
Column diameter: 100 mm
Distance from spindle to column: 250 mm
Fixed moveable table
Drilling capacity: ⌀ 25 mm
Tapping capacity: M 18
Spindle cone: CM 3
Engine power: 0.95/1.8 HP
Num. and selections of speeds: (10) 245-4000 rpm
Drilling depth: 120 mm
Weight: 250 kg
Measurements: 2,10 x 0,57 x 0,8 m

EKL 30 series
Drill of benchtop manual feed
Feed manual
Transmission belts
Column diameter: 100 mm
Distance from spindle to column: 250 mm
Fixed moveable table
Drilling capacity: ⌀ 30 mm
Tapping capacity: M 25
Spindle cone: CM 3
Engine power: 1.2/2 HP
Num. and selections of speeds: (10) 245-4000 rpm
Drilling depth: 120 mm
Weight: 250 kg
Measurements: 2,10 x 0,57 x 0,8 m