T series

Description

TS 25 series
Drill of benchtop manual feed
Feed manual
Transmission gears
Column diameter: 100 mm
Distance from spindle to column: 250 mm
Fixed base, moveable bit
Drilling capacity: ⌀ 25 mm
Tapping capacity: M 18
Spindle cone: CM 3
Engine power: 1.1/1.6 HP
Num. and selections of speeds: (8) 65 – 3060 rpm
Drilling depth: 120 mm
Weight: 200 kg
Measurements: 1,45 x 0,6 x 0,8 m.

TSA 25 series
Drill of benchtop mechanical automatic feed
Feed mechanical automatic
Transmission gears
Column diameter: 100 mm
Distance from spindle to column: 250 mm
Fixed base, moveable bit
Drilling capacity: ⌀ 25 mm
Tapping capacity: M 18
Spindle cone: CM 3
Engine power: 1.1/1.6 HP
Num. and selections of speeds: (8) 65 – 3060 rpm
Drilling depth: 120 mm
Weight: 200 kg
Measurements: 1,45 x 0,6 x 0,8 m.

TL 25 series
Drill of round column manual feed
Feed manual
Transmission gears
Column diameter: 100 mm
Distance from spindle to column: 250 mm
Fixed moveable table
Drilling capacity: ⌀ 25 mm
Tapping capacity: M 18
Spindle cone: CM 3
Engine power: 1.1/1.6 HP
Num. and selections of speeds: (8) 65 – 3060 rpm
Weight: 250 kg
Measurements: 2,14 x 0,6 x 0,8 m.

TLA 25 series
Drill of round column mechanical automatic feed
Feed mechanical automatic
Transmission gears
Column diameter: 100 mm
Distance from spindle to column: 250 mm
Fixed moveable table
Drilling capacity: ⌀ 25 mm
Tapping capacity: M 18
Spindle cone: CM 3
Engine power: 1.1/1.6 HP
Num. and selections of speeds: (8) 65 – 3060 rpm
Drilling depth: 120 mm
Weight: 250 kg
Measurements: 2,14 x 0,6 x 0,8 m.

TS 30 series
Drill of benchtop mechanical automatic feed
Feed mechanical automatic
Transmission gears
Column diameter: 100 mm
Distance from spindle to column: 250 mm
Fixed base, moveable bit
Drilling capacity: ⌀ 30 mm
Tapping capacity: M 25
Spindle cone: CM 3
Engine power: 1,5/1,9 HP
Num. and selections of speeds: (8) 78 – 3672 rpm
Drilling depth: 120 mm
Weight: 200 kg
Measurements: 1,45 x0,8 x 0,6 m.