B series

Description

B 40 series
Drill of round column electromagnetic automatic feed
Feed electromagnetic automatic
Feed: (4) 0.10-0.2-0.3-0.4
Transmission gears
Column diameter: 175 mm
Distance from spindle to column: 360 mm
Tiltable rotating table
Drilling capacity: ⌀ 40 mm
Tapping capacity: M 33
Spindle cone: CM 4
Engine power: 3 HP
Num. and selections of speeds: (9) 61 – 1169 rpm
Drilling depth: 200 mm
Weight: 610 kg
Measurements: 2,5 x 0,6 x 1,2 m.

B 50 series
Drill of round column electromagnetic automatic feed
Feed electromagnetic automatic
Feed: (6) 0.10-0.2-0.3-0.4-0.5-0.6
Transmission gears
Column diameter: 200 mm
Distance from spindle to column: 400 mm
Tiltable rotating table
Drilling capacity: ⌀ 50 mm
Tapping capacity: M 36
Spindle cone: CM 4
Engine power: 4 HP
Num. and selections of speeds: (9) 54 – 1032 rpm
Drilling depth: 230 mm
Weight: 720 kg
Measurements: 2,6 x 0,6 x 1,2 m.
Note: In case of constant raise and lower of the table’s height, the installation of the accessory Motorized Table MA is recommended.

B 60 series
Drill of round column electromagnetic automatic feed
Feed electromagnetic automatic
Feed: (6) 0.10-0.2-0.3-0.4-0.5-0.6
Transmission gears
Column diameter: 220 mm
Distance from spindle to column: 420 mm
Tiltable rotating table
Drilling capacity: ⌀ 60 mm
Tapping capacity: M 42
Spindle cone: CM 5
Engine power: 5.5 HP
Num. and selections of speeds: (12) 64 – 1210 rpm
Drilling depth: 260 mm
Weight: 820 kg
Measurements: 2,7 x 0,7 x 1,2 m.

B 70 series
Drill of round column electromagnetic automatic feed
Feed electromagnetic automatic
Feed: (6) 0.10-0.2-0.3-0.4-0.5-0.6
Transmission gears
Column diameter: 220 mm
Distance from spindle to column: 420 mm
Tiltable rotating table
Drilling capacity: ⌀ 70 mm
Tapping capacity: M 50
Spindle cone: CM 5
Engine power: 7.5 HP
Num. and selections of speeds: (12) 51 – 966 rpm
Drilling depth: 260 mm
Weight: 840 kg
Measurements: 2,7 x 0,7 x 1,2 m.