A seriesA3 CE
A compact machine with a fully enclosed housing and a safety light curtain.
- Working area
- 3048×1524 mm
- Speed
- 80 m/min
- Power (series)
- 1.5–60 kW
For sheet, tubes and profiles. 13 series: from a compact 3×1.5 m machine to the 36.5 m long H series and tube machines up to Φ850 mm.
For metal sheet. Working areas from 3048×1524 mm to 36500×3200 mm.
A compact machine with a fully enclosed housing and a safety light curtain.
For a first laser machine and single-shift work. Full protection, working areas from 3 to 12 m.
For shops cutting in several shifts: 200 m/min and acceleration up to 4 G.
Cast-iron bed, a 20 MP camera that finds the sheet edges, and automatic nozzle change.
For very large sheets: working areas up to 36.5 m long or 4.2 m wide.
For round, square and profile tubes from Φ6 to Φ850 mm, up to 18.5 m long.
A compact machine for tubes up to Φ120 mm. Offcut only 40 mm.
Up to 2.7 G and 260 rpm. Up to 500 cuts a minute on small tubes.
For precise tube cutting. T2 centres the tube in 1 second with a laser profile sensor.
New model: two chucks, cutting, drilling and tapping in one machine. Also channels and I-beams.
Three moving chucks cut the tube right to the end. Power up to 20 kW.
Cuts while the next tube is loaded or unloaded. The last section with no offcut.
A four-chuck machine for large, heavy tubes up to Φ850 mm and 18.5 m long.
One machine if you cut both sheet and tube and floor space is tight.
Sheet 3048×1524 mm and tubes Φ8–Φ230 mm. Pneumatic chucks clamp the tube in just 2 seconds.
Key data from Bodor brochures and bodor.com. We give prices in the quote.
| Series | Models | Working area, mm | Tube Φ, mm | Tube length, mm | Power, kW | Speed, m/min |
|---|---|---|---|---|---|---|
| Sheet cutting | ||||||
| A | A3 CE | 3048×1524 | – | – | 1.5–60 * | 80 |
| C | C3, C4, C6, C12 | 3048×1524 – 12200×2500 | – | – | 1–60 | 110–180 |
| P | P3, P4, P6, P8, P12 | 3048×1524 – 12500×2600 | – | – | 3–60 | 200 |
| X | X3, X3 Pro | 3048×1524 | – | – | on request | 200 |
| H | H3000, H4000 | 36500×3200 · 24500×4200 | – | – | on request | 80 |
| Tube and profile cutting | ||||||
| K | K0C, K1C | – | 6 – 120 | 6500 | 1.5–6 * | 120–150 |
| SK | SK0, SK1, SK2 | – | 6 – 230 | 6500 / 9200 | on request | 120–180 |
| T | T2, T3 | – | 8 – 356 | 6500 / 9200 | 3–6 | 100–160 |
| Future | Future2-6, Future2-9 | – | 11 – 273 | 6500 / 9200 | – | – |
| N | N2, N3, N5 | – | 8 – 360 | 6500 – 15200 | 3–20 | 50–110 |
| M | M2, M3, M5 | – | 8 – 510 | 6500 – 15200 | 3–12 | 34–110 |
| MC | M3C, M6C, M8C | – | 25 – 850 | 12500 / 18500 | on request | 30–60 |
| Combined machine | ||||||
| CT | C3T | 3048×1524 | 8 – 230 | 6000 | 1–6 | 100 |
* power range for the whole series, not a specific model. Speed = maximum travel speed.
Answer three questions: what you will cut, what size and how much. We will suggest 1–3 series and fill in the request for you.
Tell us what you cut and how much. We will prepare a quote.
We help you pick the series, working area and power for your parts.
Usually 1–4 months, depending on the machine. We state the exact lead time in the offer.
We install, commission and train your operators on site.
The C series is made for a first laser machine and single-shift work. If you will cut in several shifts, look at the P series. We give an exact recommendation in the quote.
It depends on the material, the thickness and the speed you need. Tell us what you will cut and we will suggest the power.
The C series has an option for cutting reflective sheet (scanning cutting). Ask us about the other series.
Usually 1–4 months, depending on the machine and its equipment. We state the exact lead time in the offer.
5 years from Bodor on three main parts: the BodorThinker control system, the BodorPower laser source and the BodorGenius cutting head.
Yes. We only sell machines with CE marking.
Tell us what you want to cut: material, thickness, sheet or tube size and volume. We will reply with a quote and a recommendation on which series suits you.
Aptiekas iela 21, Riga · Mon–Fri 9:00–17:00